某雷达风机组件防护设计改进

对保证某型雷达数字阵列模块（DAM）有效散热的风机组件批量报故问题进行系统分析，兼顾产品外购及其自身特点，并从保证可靠性、控制成本支出的角度，统筹改进方案。完成产品设计、工艺、维护的研究，完成相关改进及实物验证。最终把改进的技术成功用于产品上，以提高产品环境适应性，提升装备可靠性。     

牺牲阳极的阴极保护法在电力系统接地体防腐中的应用

电力行业是目前国家非常重视与大力发展的行业之一。近些年来,由于接地系统接地电阻不合格引起的电力系统事故逐渐增多,并且接地电阻升高的很大一部分原因是接地体腐蚀造成的,因而人们越来重视接地体的抗腐蚀保护。简要阐述了电力系统目前预防接地体腐蚀所采取的牺牲阳极的阴极保护法,并对接地体新的改造方法提出一些建议。     

适用于“一步酸溶法”生产氧化铝工艺中稀释料浆的高分子絮凝剂的合成

为达到"一步酸溶法"生产氧化铝工艺中稀释料浆在高温、高酸度工况下进行固液高效分离的目的,以丙烯酰胺(AM)与阳离子(DMDAAC)为共聚单体,通过水溶液聚合法合成了阳离子聚丙烯酰胺(CPAM)絮凝剂。以转化率和相对分子质量为目标,通过单因素分析法确定了最优的合成工艺条件,即反应温度30℃,单体总质量分数为30%,阳离子度5%,K2S2O8和NaHSO3质量分数均为0.005%,2,2′-偶氮二(2-脒基丙烷盐酸盐)(V50)质量分数为0.0025%,乙二胺四乙酸(EDTA)质量分数为0.05%的条件下,反应时间为6 h,获得相对分子质量为1.2×107溶解性能较好的阳离子型聚丙烯酰胺(CPAM)。     

An Improved Torque Sensorless Speed Control Method for Electric Assisted Bicycle With Consideration of Coordinate Conversion

In this paper, we propose an improved torque sensorless speed control method for electric assisted bicycle, this method considers the coordinate conversion. A low-pass filter is designed in disturbance observer to estimate and compensate the variable disturbance during cycling. A DC motor provides assisted power driving, the assistance method is based on the real-time wheel angular velocity and coordinate system transformation. The effect of observer is proved, and the proposed method guarantees stability under disturbances. It is also compared to the existing methods and their performances are illustrated through simulations. The proposed method improves the performance both in rapidity and stability.      

双相区加速冷却处理对X80管线钢组织与性能的影响

采用双相区加速冷却法(加速冷却始冷温度为700 ℃)对X80管线钢进行热处理,获得了贝氏体和铁素体(B+F)双相组织。然后通过组织表征、力学性能测试以及在3.5wt%NaCl溶液中的耐蚀性进行研究。结果表明:热处理后获得的管线钢组织由板条状贝氏体、多边形铁素体及少量马氏体/奥氏体岛组成。与热处理前相比,(B+F)双相管线钢屈强比较低,为0.65,初始加工硬化指数为0.31,均匀伸长率达8.3%,塑性显著提升;双相组织中含有52.4%的铁素体,因而耐腐蚀性明显提高。通过双相区加速冷却法获得的(B+F)两相组织在塑变过程中发生协调变形,可以适应大变形的需求,同时耐蚀性优异,为大变形管线钢实际生产提供一定的借鉴。     

New ways to improve the damping properties in high‐performance thermoplastic vulcanizates

The incorporation of viscoelastic materials represents an effective strategy to reduce the vibratory level of structural components. Thermoplastic vulcanizates (TPVs) are a special type of viscoelastic material that combines the elastomeric properties of rubbers with the easy processing of thermoplastics. In the present work, we propose innovative ways to improve the damping properties of high‐performance TPVs by using rubbers with carboxylic functionalities. For that, TPVs from physical blends of carboxylated hydrogenated acrylonitrile butadiene rubber (XHNBR) and polyamide 6 (PA6) were prepared. The chain dynamics of different mixed crosslink systems containing peroxide, metal oxides and hindered phenolic antioxidants were investigated in order to find the most suitable strategy to design a high‐performance TPV system with upgraded damping properties. The results indicate that the damping performance of the TPV system can be tailored by controlling the type and magnitude of the bonding interactions between the mixed crosslink system and the XHNBR rubber phase. Therefore, this study demonstrates the potential of TPV systems containing carboxylic rubbers as high‐performance damping materials. © 2020 Society of Chemical Industry     

定子分段式永磁直线同步电机速度波动抑制方法研究

为了解决定子分段式永磁直线同步电机(PMLSM)存在的因磁阻效应、负载阻力、摩擦力、参数摄动以及动子进出定子时耦合面积变化所造成的控制性能下降的难题,根据动子和定子的耦合状态,提出一种在完全耦合阶段和动子退出定子阶段的分段式控制方法。首先,在动子与定子完全耦合阶段采用改进滑模控制器减小推力波动导致的速度波动,再通过加入扰动观测器降低滑模切换项所带来的抖振现象;在动子退出定子阶段,建立相关电磁参数与动子位置的函数关系,实时补偿由耦合面积变化引起的动子失速,使动子速度在退出时接近给定值。仿真及实验结果表明动定子完全耦合过程中的速度稳态误差为0.005 m/s,收敛时间为0.3 s,动子退出定子阶段的速度波动不超过0.04 m/s,满足定子分段式PMLSM用于长行程自动运输系统对平稳性及快速性的需求。     

朝凯煤矿露天台阶爆破装药结构优化应用研究

本文以神达朝凯煤矿正在开采的台阶为工程背景,针对该矿在台阶爆破过程中存在着大块率高、根底多的现象,通过改变装药结构的方式对爆破参数进行优化。实践证明,优化后大块率和根底问题的治理效果明显。     

浅谈桥梁深基坑挡土墙防护施工方案

本文根据该项工程实际情况和相关技术标准、水文地质特征,对施工准备、测量放线、基坑开挖、挡土墙施工、基坑监测等关键部分进行深入研究。     

Effect of thermomechanical processing on microstructure and mechanical properties of CoCrFeNiMn high entropy alloy

The CoCrFeNiMn high entropy alloy was produced by homogenization, cold rolling and recrystallization. The effects of thermomechanical processing on microstructures and tensile properties at different temperatures were investigated using X-ray diffractometry (XRD), optical microscopy (OM), scanning electron microscopy (SEM) and multi-functional testing machine. The results show that dendritic structures in cast alloy evolve into equiaxed grains after being recrystallized, with single face-centered cubic (FCC) phase detected. The most refined alloys, stemming from the highest rolling ratio (40%), exhibit the highest strength due to the grain boundary strengthening, while the variation of elongation with temperature shows a concave feature. For the coarse-grained alloys, both the ductility and work hardening ability decrease monotonically with increasing temperature. Serrated flow observed at intermediate temperatures is attributed to the effective pinning of dislocations, which manifests the occurrence of dynamic strain hardening and results in the deterioration in ductility. Besides, dimples on the fracture surfaces indicate the typical ductile rupture mode.